PixaPro Lumi 200 II Twin Flash Studio Lighting Kit

The PixaPro Lumi 200 II Twin Flash Studio Lighting Kit has been created to be a home studio lighting set-up that is suitable for both the serious or amateur photographer. The Lumi 200 II flash unit offers around 3 times more power output than a flashgun. This kit consists of 2x Lumi 200 II flash head units which have every feature you will need from a studio flash such as a built-in receiver, slave mode, fast recycling time and flash duration. It’s also part of THE ONE SYSTEM, which you can mix and match with any other flash in the PixaPro range.
Also included are 2 x light weight and durable 240cm Air cushioned Stand and 2x 60x90cm rectangular softbox to diffuse and soften the light. It's perfect for portrait, fashion, beauty and product Photography

Lumi 200 II studio flash light
The PixaPro Lumi 200 II is a 200W photography strobe flash light, which gives you a lot more flexibility compared to continuous lighting since flash-exposure is not affected by shutter speed. Therefore, you can use your camera’s shutter speed to control the amount of ambient light entering your scene, which is not possible with continuous light sources.
Flash Duration: Boasts a flash duration of up to 1/2000th of a second giving Short flash durations for sharper images and stopping motion.
Fast Recycling time: Just over one second allows you to take more frequent shots also featured is a programmable ready beep sound when the flash is ready to make the next flash.
Power Range: 6 f-Stop Power Range - 1/1-1/32 power in 1/3 or 1/10 Stop Increments (With Supported Flash Triggers)
Modeling Bulb and Lamps: comes supplied with a bright, High quality 150w modelling lamp, and a 200Ws flash tube, that has a 6-stop power range (1/1 – 1/32 power) which can be adjusted in 1/10 of a stop increments.
The One System: can be used with any other Flash unit in the PIXAPRO range.
Slave Cell: an intelligent slave cell (Pre-flash detector system) cell that can be set to ignore a Pre-Flash, which enables the use of the LUMI alongside speedlights or any other TTL strobe.
Compatible Accessories: Compatible with a wide range of S-Type Accessories and Modifiers.
Built in 2.4GHz flash receiver: allows it to be used in conjunction with the ST-III, ST-IV or Pro AC 2.4GHz flash Triggers. This allows you to control your flash heads remotely such as flash power settings, Modelling lamp on/off, changing groups & channels and Triggering. (making it also part of the ONE System)
3.5mm sync jack: allowing it to be triggered by a sync cable, or other radio triggering systems.

60x90cm softbox
This softbox produces soft, natural-looking lighting, ideal for producing amazing looking images. Two layers of diffusion creates more even coverage compared to a single layer of diffusion. This in return reduces hot spots in your photos.
This large rectangular softbox also includes a 5cm honeycomb grid designed to narrow the spread of light, giving you more control over its direction.
It comes supplied with an S-Type fitting, however, the fitting can be used with a variety of other flash brands with its unique interchangeable ring.

240cm air cushioned stands
3 tier extension - making it collapsible to a height of 75cm and fully extend to 240cm.
Air cushioned dampening system - this helps to prevent any sudden drops to minimise the risk of damage to your equipment or causing injury to yourself.
Sturdy central column - can be lowered down to be used as a fourth leg, offering extra stability.
Detachable spigot - Comes with the most popular universal 1/4" and 3/8” thread which makes it easy to use with other units up to 5kg.

In the box:
2x LumiI 200 II Flash
2x 60x90cm Softbox
2x Light Stand

MFR ref: A-020609